RRII Library Search for 'su:"PP"'

Effect of molecular weight of natural rubber, cure system and type of antioxidant on the processing and technological properties of natural rubber- Isotactic polypropylene thermoplastic blends

By Varghese S..
Proceedings of the Indian Rubber Conference, Rubcon 2002, 12-13 January 2002.(Eds. T.K. Chaki and D. Khastgir). Allied Publishers, New Delhi, pp.237-241. 2002

]]> Place hold on Effect of molecular weight of natural rubber, cure system and type of antioxidant on the processing and technological properties of natural rubber- Isotactic polypropylene thermoplastic blends

Basic studies on development of structure hierarchy in tubular film blown dynamically vulcanized PP/EPDM blend

By Wang M D.
Rubber Chemistry and Technology 2001 .
761-778

]]> Place hold on Basic studies on development of structure hierarchy in tubular film blown dynamically vulcanized PP/EPDM blend

Comparison of dynamically loaded PP/EPDM and PP/mPE-Blends using the hysteresis measurement method

By Raue Frank.
Journal of Elastomers and Plastics 1999 .
194-204

]]> Place hold on Comparison of dynamically loaded PP/EPDM and PP/mPE-Blends using the hysteresis measurement method

Dynamically vulcanized PP/EPDM blends: Multifunctional peroxides as crosslinking agents.Part.1

By Naskar Kinsuk.
Rubber Chemistry and Technology 2004 .
955-971

]]> Place hold on Dynamically vulcanized PP/EPDM blends: Multifunctional peroxides as crosslinking agents.Part.1

Effect of compatibilizer EPDM on the weld line behaviour of PP/HDPE blends

By Lakshmikutty Amma B.
Proceedings of the Asia Rub Tech Expo, 23-25 November 2006, Indian Rubber Institute, Kochi. pp.138-139.

]]> Place hold on Effect of compatibilizer EPDM on the weld line behaviour of PP/HDPE blends

Effect of viscosity ratio, rubber composition, and peroxide/coagent treatment in PP/EPR blends

By Kim B K.
Journal of Applied Polymer Science 1996 .
439-447

]]> Place hold on Effect of viscosity ratio, rubber composition, and peroxide/coagent treatment in PP/EPR blends

Electrically Conductive Nanocompositeas smart material based on PP/EPDM thermoplastic Vulcanizate and Nanographite

By Katbab AA.
Rubber India 2013 .
48-54

]]> Place hold on Electrically Conductive Nanocompositeas smart material based on PP/EPDM thermoplastic Vulcanizate and Nanographite

Foaming of vulcanized PP/EPDM blends using chemical blowing agents

By Dutta A.
Rubber Chemistry and Technology 1992 .
778-791

]]> Place hold on Foaming of vulcanized PP/EPDM blends using chemical blowing agents

Influence of processing history and composition on the basic structure and biaxial deformation behavior in dynamically vulcanized PP/EPDM blends

By Wang M D.
Rubber Chemistry and Technology 2001 .
745-760

]]> Place hold on Influence of processing history and composition on the basic structure and biaxial deformation behavior in dynamically vulcanized PP/EPDM blends

Influence of various peroxides in PP/EPDM thermoplastic vulcanizates at varied blend ratios

By Naskar K.
Journal of Elastomers and Plastics 2006 .
163-180

]]> Place hold on Influence of various peroxides in PP/EPDM thermoplastic vulcanizates at varied blend ratios

Kinetic analysis of the thermal degradation of PP-EPDM blends

By Lopez-Manchado Miguel.
Rubber Chemistry and Technology 2000 .
694-705

]]> Place hold on Kinetic analysis of the thermal degradation of PP-EPDM blends

Mechanical and morphological properties of polypropylene/nitrile butadiene rubber compatibilized vulcanizates

By Soares B G.
Kautschuk Gummi Kunststoffe 2006 .
110-114

]]> Place hold on Mechanical and morphological properties of polypropylene/nitrile butadiene rubber compatibilized vulcanizates

Mechanical behaviour and fracture toughness evaluation of rubber toughened polypropylene nanocomposites

By Lim J W.
Plastics, Rubber and Composites 2006 .
37-46

]]> Place hold on Mechanical behaviour and fracture toughness evaluation of rubber toughened polypropylene nanocomposites

Morphological and mechanical properties of rubber-toughened polyamide 6/polypropylene nanocomposites prepared by different methods of compounding

By Wahit M U.
Journal of Elastomers and Plastics 2006 .
231-247

]]> Place hold on Morphological and mechanical properties of rubber-toughened polyamide 6/polypropylene nanocomposites prepared by different methods of compounding

Multifunctional peroxides as a means to improve properties of dynamically vulcanized PP/EPDM blends

By Naskar K.
Kautschuk Gummi Kunststoffe 2004 .
235-239

]]> Place hold on Multifunctional peroxides as a means to improve properties of dynamically vulcanized PP/EPDM blends

New developments in dynamically cured PP-EPDM blends

By Lopez-Manchado Miguel A.
Rubber Chemistry and Technology 2001 .
211-220

]]> Place hold on New developments in dynamically cured PP-EPDM blends

Properties and morphology of thermoplastic vulcanizates based on PP/SBR and PP/EpSBR

By Jacobi M M.
Kautschuk Gummi Kunststoffe 2006 .
49-54

]]> Place hold on Properties and morphology of thermoplastic vulcanizates based on PP/SBR and PP/EpSBR

Study on parameters affecting the morphology development of dynamically vulcanised thermoplastic elastomers based on EPDM/PP in a co-rotating twin screw extruder

By Sararoudi S Shafiei.
Rubber Chemistry and Technology 2004 .
847-855

]]> Place hold on Study on parameters affecting the morphology development of dynamically vulcanised thermoplastic elastomers based on EPDM/PP in a co-rotating twin screw extruder

Thermoplastic elastomers based on PP/EPDM blends by dynamic vulcanization (2007 Short Reviews)

By Naskar Kinsuk.
Rubber Chemistry and Technology 2007 .
504-519

]]> Place hold on Thermoplastic elastomers based on PP/EPDM blends by dynamic vulcanization (2007 Short Reviews)